Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell G15 5511 Service Manual

PDF

Removing the USB board

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.
  4. Remove the rear cover.
  5. Remove the solid-state drive 1.
  6. Remove the solid-state drive 2.
  7. Remove the wireless card.
  8. Remove the memory module.
  9. Follow the procedure from step 1 to step 17 in Removing the system board.
    NOTE System board can be removed with the heat sink and USB board attached.

About this task

The following image indicates the location of the USB board and provides a visual representation of the removal procedure.

Image: Removing the USB board

Steps

  1. Turn the system board over.
  2. Remove the two screws (M2x4) that secure the USB board to the system board.
  3. Remove the USB board from the system board.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\