Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
The following image(s) indicate the location of the memory modules and provides a visual representation of the installation procedure.
Steps
- Ensure that the securing clips are in an open position.
- Align the notch on the memory module with the tab on the memory-module slot.
- Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place.
NOTE:The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it.
NOTE:Repeat step 1 to step 3 when installing more than one memory module in your computer.
Data is not available for the Topic