CAUTION:The processor may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.
CAUTION:For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease.
The following image(s) indicate the location of the processor and provides a visual representation of the removal procedure.
Steps
Lay the computer with its right side facing down.
Press the release lever down and then push it away from the processor to release it from the securing tab.
CAUTION:When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.
Extend the release lever completely and open the processor cover.
Gently lift the processor from the processor socket on the system board.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\