Installing the
M.2 PCIe SSD
NOTE:The instructions are applicable to M.2 SATA SSD also.
- Place the SSD thermal pad into the slot on the system board [1] .
- Insert the M.2
PCIe SSD to the connector on the system board [2].
- Replace the single (M2x3.5) screw that secures the M.2 PCIe SSD
to the system board [3].
- Install the:
- Heatsink assembly
- Hard drive and optical drive module
- HDD assembly
- Front bezel
- Side cover
- Follow the procedure in After working inside your computer.
Data is not available for the Topic