Installing system
fan
- Insert the grommets into the slots from the back of the computer.
NOTE Install the lower two grommets first.
- Hold the system fan with the cable facing the bottom of the computer.
- Align the grooves of the system fan with the grommets on the chassis
wall.
- Pass the grommets through the corresponding grooves on the system
fan [1].
- Stretch the grommets and slide the system fan toward the computer
until it locks into place [2].
- Connect the system fan cable to the connector on the system board
[3].
- Close the front panel door.
- Install the:
- Intrusion switch
- Front bezel
- Side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic