Dell PowerEdge RAID Controller 9 User’s Guide H330, H730, and H830

Migrating virtual disks

1. Turn off the system.
2. Ensure that all the latest firmware and drivers for the PERC H330, H730, H730P, H730P MX, or H830 card (available at Dell.com/support/home) are installed on the destination system.
   For more information, see Driver installation.
3. Move the physical disks from PERC H310, H710, H710P, or H810 card to the PERC 9 series.
4. Boot the system and import the foreign configuration that is detected. You can do one of the following:
   • Press <F> to automatically import the foreign configuration.
   • Enter the BIOS Configuration Utility and navigate to the Foreign Configuration View.
   NOTE:For more information on accessing the BIOS Configuration Utility, see Entering the BIOS configuration utility.

   NOTE:For more information on Foreign Configuration View, see Foriegn Configuration View.
5. Exit the BIOS Configuration Utility and reboot the system.