Dell Command Line Reference Guide for the S6010–ON System 9.14.2.4

mtu

Enable the verification of the configured maximum transmission unit (MTU) value in the received RA packets.

Syntax

mtu value

To reset the MTU value, use the no mtu value command.

Parameters

value

Enter the maximum transmission unit value in bytes. The range is from 1,280 to 11,982 bytes.

Defaults

0

Command Modes

POLICY LIST CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.11(0.0)

Introduced on the C9010.

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.9(0.0)

Introduced on the Z9500.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Related Commands

• ipv6 nd ra-guard enable — configure the RA guard related commands.

• ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy configuration mode.