Dell Command Line Reference Guide for the S6010–ON System 9.14.2.4

To delete access to a command, use the no role mode role-name

mode

Enter one of the following keywords as the mode for which you are controlling access:

configure for CONFIGURATION mode

exec for EXEC mode

interface for INTERFACE modes

line for LINE mode

route-map for Route-map mode

router for Router mode

addrole

Enter the keyword addrole to add permission to the command. You cannot add or delete rights for the sysadmin role.

deleterole

Enter the keyword deleterole to remove access to the command. You cannot add or delete rights for the sysadmin role.

role-name

Enter a text string for the name of the user role up to 63 characters. These are 3 system defined roles you can modify: secadmin, netadmin, and netoperator.

reset

Enter the keyword reset to reset all roles back to default for that command. 

command

Enter the command’s keywords to assign the command to a certain access level. You can enter one or more keywords.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.0)  

Introduced on the Z9000, S6000, S4820T, S4810, and MXL. 

• userrole — creates user roles.