Latitude 3189 Owner's Manual

Removing display assembly

Follow the procedure in Before working inside your computer .
Remove the:
To remove cables:
1. Remove the screw M2.0x3.0 and lift the metal bracket that secures the WLAN card on the system board [1, 2].
2. Disconnect the WLAN cables [3].
3. Remove the screws M2.0x.30 and lift the metal bracket that secures the display cable on the computer [4, 5].
4. Lift the latch, and disconnect the cable [6].
Disconnect the sensor cable on the system board, and flip over the computer [1, 2]
To remove the display assembly:
1. Remove the display hinge screws M2.0xM5.0 that secure the display assembly to the computer [1].
2. Lift the display assembly away from the computer [2].