- Notes, Cautions, and Warnings
- Copyright
- Overview
- Getting started with ASM 8.0
- Initial setup
- Dashboard
- Services
- Templates
- Manage templates
- Viewing template details
- Creating template
- Editing template information
- Building template overview
- Building and publishing template
- Importing template
- Editing template
- Viewing template details
- Deleting template
- Cloning template
- Deploy service
- Decommissioning services provisioned by ASM
- Component types
- Component combinations in templates
- Sample templates
- Template – deploy Citrix XenDesktop for 500 users
- Template – deploy operating system to hard drive
- Template – deploy physical server and virtual machine
- Template – deploy virtual machines to cluster
- Template – install ESXi to SD card with Fibre Channel storage
- Template – install ESXi to SD card with iSCSI storage
- Template – deploy Hyper-V host with iSCSI storage
- Template – deploy Hyper-V cluster with iSCSI storage
- Template – deploy Hyper-V cluster with Fibre Channel storage to SCVMM
- Template – deploy VMware cluster with NetApp storage
- Template – boot from Fibre Channel SAN
- Template – boot from iSCSI SAN
- Template – deploy virtual machine template clone on Hyper-V cluster
- Template – deploy virtual machine template clone on VMware cluster
- Template – deploy SQL Server 2012
- Additional template information
- Manage templates
- Resources
- Understanding
All Resources tab
- Resource health status
- Resource operational state
- Resource firmware compliance status
- Updating firmware
- Viewing firmware compliance report
- Discovery overview
- Configuring
resources or chassis
- Removing discovered resources
- Configuring default firmware repository
- Running firmware compliance
- Configuring global chassis settings
- Configuring unique chassis settings
- Configuring unique server settings
- Configuring unique I/O module settings
- Configuring uplink ports
- Completing the chassis configuration
- Adding or editing Chassis Management Controller (CMC) user
- Adding or editing Integrated Dell Remote Access Controller (iDRAC) user
- Removing resources
- Updating resource inventory
- Managing and unmanaging resources
- Viewing resource details
- Understanding server pools
- Understanding
All Resources tab
- Settings
- Troubleshooting
- LC operation times out while deploying server profile to a server
- Hyper-V host deployments using network storage only support certain configurations
- iSCSI storage network only support static IP addressing
- Unable to deploy a service for compellent component with same server object and volume names
- Unable to deploy a service using the template with two Equallogic CHAP components
- Unable to log in to ASM using active directory using “”
- Chain booting issue occurs while booting microkernel in a multi-hop DHCP environment
Active System Manager Version 8.0 User’s Guide
Copyright
Copyright
© 2014 Dell Inc. All rights reserved.
This product is protected
by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc.
in the United States and/or other jurisdictions. All other marks and
names mentioned herein may be trademarks of their respective companies.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\