Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Latitude 7480 Owner's Manual

PDF

Removing camera-microphone module

The removal procedure of the microphone camera module is only for a nontouch display configuration.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the WLAN card.
  4. Remove the WWAN card.
  5. Disconnect the battery cable from the connector on the system board.
  6. Remove the display assembly.
  7. Remove the display bezel.
  8. Remove the display hinge.
  9. To remove the camera microphone module:
    1. Peel off the two pieces of conductive tape covering the camera microphone module [1].
      NOTE: The conductive tape is a separate part from the camera module that must be removed and then reattached when replacing the camera microphone module.
    2. Lift the camera microphone module [2].
    3. Disconnect the camera cable from the camera module [3].
    4. Lift and remove the camera microphone module [4].
      Removing camera

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\