Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7480 Owner's Manual

Removing heat sink assembly

Heat sink assembly consists of heat sink and the system fan.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Disconnect the battery cable from the connector on the system board.
  4. To remove the heat sink assembly:
    NOTE: To identify the number of screws, see screw list.
    1. Disconnect the fan cable from the system board [1].
      NOTE: After removing the heat sink assembly, ensure to disconnect the fan cable.
    2. Remove the M2.0 x 5.0 screws that secure the heat sink assembly to the system board [2].
      NOTE: Remove the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.
    3. Lift the heat sink assembly from the system board [3].
    Image: Image shows removal of heatsink

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\