Dell Latitude 7480 Owner's Manual

Removing speaker module

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. To release the speaker module:
   1. Push to disconnect the speaker cable from the connector on the system board [1].
      NOTE: Ensure to unroute the speaker cable from the routing clip.

      NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage.
   2. Un-route the speaker cable from the routing clips [2].
   3. Remove the tape that secures the speaker cables to the touchpad board [3].
   
5. To remove the speaker module:
   1. Remove the M2.0x3.0 screws (4) that secure the speaker module to the computer [1].
   2. Lift the speaker module from the computer .
      NOTE: Ensure to un-route the speaker cable from the routing clips.