Inspiron 17 5000 Service Manual

Procedure

1. Place the status-light board in an angle on the palm rest and keyboard assembly and snap it in place.
2. Adhere the status-light board cable to the palm rest and keyboard assembly.
3. Slide the status-light board cable into the connector on the system board and close the latch to secure the cable.
4. Route the speaker cable through the routing guides and place the speaker on the palm rest and keyboard assembly.
5. Connect the speaker cable to the slot on the system board.
6. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
7. Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.