Inspiron 17 5000 Service Manual

Procedure

1. Slide and place the palm rest and keyboard assembly on the display assembly.
2. Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
3. Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.
4. Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
5. Route the display cable through the routing guides on the palm rest and keyboard assembly.
6. Adhere the tape that secures the display cable to the palm rest and keyboard assembly.
7. Slide the display cable to the connector on the system board and close the latch to secure the cable.