Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

Verifies if the destination IPv6 address is reachable from iDRAC or with the current routing-table contents. A destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination IPv6 address.

To run this subcommand, you must have Debug privilege.

racadm ping6 <ipv6address>

Pinging 2011:de11:bdc:194::31 from 2011:de11:bdc:194::101 with 32 bytes of data:
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                
                                                Ping statistics for 2011:de11:bdc:194::31:
                                                Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
                                                Approximate round trip times in milli-seconds:
                                                Minimum = 0ms, Maximum = 0ms, Average = 0ms