Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E5270 Owner's Manual

Installing the display assembly

  1. Place the display assembly to align with the screw holders on the computer.
  2. Tighten the screws to secure the display assembly to the computer.
  3. Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
  4. Connect the antenna cables and display cable to the connectors.
  5. Place the display cable bracket over the connector and tighten the screw to secure the display cable to the computer.
  6. Place the display hinge bracket and tighten the screw to secure it to the computer.
  7. Install the:
    1. WLAN

    2. WWAN

    3. battery

    4. base cover

  8. Follow the procedure in After working inside your computer .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\