Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Debugging BGP

To enable BGP debugging, use any of the following commands.

  • View all information about BGP, including BGP events, keepalives, notifications, and updates. EXEC Privilege mode debug ip bgp [ ip-address | peer-group peer-group-name] [in | out]
  • View information about BGP route being dampened. EXEC Privilege mode debug ip bgp dampening [in | out]
  • View information about local BGP state changes and other BGP events. EXEC Privilege mode debug ip bgp [ ip-address | peer-group peer-group-name] events [in | out]
  • View information about BGP KEEPALIVE messages. EXEC Privilege mode debug ip bgp [ ip-address | peer-group peer-group-name] keepalive [in | out]
  • View information about BGP notifications received from or sent to neighbors. EXEC Privilege mode debug ip bgp [ ip-address | peer-group peer-group-name] notifications [in | out]
  • View information about BGP updates and filter by prefix name. EXEC Privilege mode debug ip bgp [ ip-address | peer-group peer-group-name] updates [in | out] [prefix-list name]
  • Enable soft-reconfiguration debug. EXEC Privilege mode debug ip bgp { ip-address | peer-group-name} soft-reconfiguration In-BGP is shown using the show ip protocols command.
The system displays debug messages on the console. To view which debugging commands are enabled, use the show debugging command in EXEC Privilege mode.

To disable a specific debug command, use the keyword no then the debug command. For example, to disable debugging of BGP updates, use no debug ip bgp updates command.

To disable all BGP debugging, use the no debug ip bgp command.

To disable all debugging, use the undebug all command.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"