Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge C4130 Owner's Manual

Installing a cooling fan

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in before working inside your system.
  3. Remove the system top cover (front).

Steps

  1. Hold the cooling fan by the sides with the cable end facing the system board.

    CAUTION: Make sure the airflow arrows on the side of the fans are pointing to the rear of the chassis.  If the cooling fan is installed in reverse direction the system may overheat.

  2. Align the cooling fan with the slot on the chassis and slide the fan into the slot.
  3. Connect the cooling fan power cable to the cooling fan connector on the system board.
    Figure 1. Installing cooling fan
    This figure shows installing cooling fan.
    1. cooling fan (8)
    2. cooling fan power cable
    3. cooling fan connector on system board
    4. cooling fan slot

Next steps

  1. Install the system top cover (front).
  2. Follow the procedure listed in after working inside your system.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"