Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Latitude 3420 Guide de maintenance

Removing the coin-cell battery

Prérequis

  1. Follow the procedure in before working inside your computer.
  2. Enter the service mode.
  3. Remove the microSD-card.
  4. Remove the SIM card tray for 4G LTE enabled systems.
  5. Remove the base cover.
  6. Remove the battery.
  7. Remove the M.2 SSD for systems shipped with discreet graphic card.
  8. Remove the M.2 SSD thermal platefor systems shipped with discreet graphic card.
  9. Remove the M.2 SSD conversion bracketfor systems shipped with discreet graphic card.
  10. Remove the WWAN card for systems shipped with integrated graphic card and enabled with 4G LTE.
  11. Remove the WWAN I/O boardfor systems shipped with integrated graphic card and enabled with 4G LTE.

À propos de cette tâche

The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.

Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly

Étapes

  1. Disconnect the coin-cell battery cable from the connector on the I/O board.
  2. Lift and remove the coin-cell battery from the palmrest assembly.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\