This option is used to import the existing configuration to
the RAID controller or clear the existing configuration. The right-hand panel of the screen lists attributes of the virtual
drive or other device selected in the left panel.
Virtual Drives
Drives
Available size
Hot spare drives
PD Mgmt (Physical Drive Management)
This screen displays basic information about
existing physical drives connected to the selected controller, including drive ID, vendor,
size, type, and state
and allows you to manage physical
drives.
Press F2 to show the context menu:
Rebuild
Copyback
Locate
Place Drive online
Place drive offline
Make Global HS
Remove Hot Spare drive
Make JBOD
Make unconfigured good
Prepare for Removal
Ctrl Mgmt (Control Management)
This screen allows you to change the settings for controller options
such as Enable Controller BIOS, Enable BIOS Stop on Error and
others. It also allows you to select a bootable virtual drive,
restore default controller settings.
Properties
The Properties screen displays the controller properties like
current versions of the controller BIOS, the MegaRAID firmware the
Configuration Utility and the Boot block.
NOTE:Press <Ctrl> + <N> to move to the next screen and Press <Ctrl> + <P> to go back to the previous screen.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\