Ugrás a fő tartalomra
Kijelentkezés

Üdvözli a Dell!

Saját fiók
  • Rendelésfeladás gyorsan és egyszerűen
  • Rendelések megtekintése és a kiszállítási állapot követése
  • Terméklista létrehozása és elérése
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Bejelentkezés Fiók létrehozása Premier bejelentkezés Partnerprogram – bejelentkezés
Kapcsolatfelvétel

Dell Docking Station WD19 User Guide

PDF

Removing the USB Type-C cable module

Prerequisites

The Dell Docking Station WD19 is shipped with the USB Type-C cable attached. To remove/change the cable module, follow these steps:

Steps

  1. Turn over the docking station.
    Turn over the docking station.
  2. Remove the two M2.5 x 5 screws [1], and turn over the docking station [2].
    Remove the two M2.5 x 5 screws
  3. Gently pull the cable module away from the docking station.
    Gently pull the cable module away.
  4. Lift and remove the USB Type-C cable module from its connector inside the docking station.
    Lift and remove the USB Type-C cable module

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\