Alienware Aurora R13 Setup and Specifications

Storage

This section lists the storage options on your Alienware Aurora R13.

Your Alienware Aurora R13 supports one of the following storage configurations:

Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives
Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives + one 3.5-inch hard drive or 2.5-inch hard drive
Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives + one 3.5-inch hard drive + one 2.5-inch hard drive

NOTE: Your Alienware Aurora R13 comes shipped with one 3.5-inch hard drive. When installing an additional 2.5-inch hard drive, contact Dell.com technical support to purchase an additional SATA cable to connect the 2.5-inch drive to the system board.

The primary drive of your Alienware Aurora R13 varies with the storage configuration. For computers:

With a M.2 drive, the M.2 drive is the primary drive.
With a M.2 drive and one 3.5-inch hard drive, the M.2 drive is the primary drive.

Table 1. Storage specifications
The following table provides the different storage options available on Alienware Aurora R13.
Storage type	Interface type	Capacity
One M.2 2230 solid-state drive	PCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps	Up to 256 GB
One M.2 2280 solid-state drive	PCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps	Up to 2 TB
One 3.5-inch hard drive	SATA AHCI 6 Gbps	Up to 2 TB

ようこそ

Dellへようこそ

Alienware Aurora R13 Setup and Specifications

Storage

このコンテンツを評価する