メイン コンテンツに進む
ログアウト

Dellへようこそ

マイアカウント
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration（会社情報の管理）」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。
ログイン アカウントの新規作成 プレミアログイン パートナー プログラム サインイン
お問い合わせ

Dell.comカート

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

Configuring desktop appliance (Power On to Power Off VDI theme)

We can configure Desktop Appliance using GUI, INI and DHCP. For INI configuration please refer the tags description of DesktopAppliance, CitrixConnectionType, PNAgentServer and Storename INI parameters.

For DHCP configuration, By default, the Desktop Appliance screen is available only in Admin mode. Any changes made through Desktop Appliance screen is saved and continued for the built-in thinuser.
  1. Click the ON/OFF button to enable or disable the VDI theme option after you log in to the session.
  2. From the drop-down list, select your preferred VDI theme.
    • NOTE: Only Citrix theme is supported in this release.
    Figure 1. Desktop Appliance Settings
  3. Select the type of Citrix Server. Citrix server , Protocol and Storename can be configured from Change global settings page. Go to All connections page, select Citrix option and then select Change global settings option to configure the Citrix settings. For more settings for Applications or Desktops, go to All connections page, select Citrix option and then select Change global settings option to configure the Applications or Desktops settings.
  4. Click Save. You are prompted to restart the system.
  5. Click OK to save the changes and restart the system in selected theme.
  6. After the system is restarted, a log on button is displayed.
    1. Click the Log On button.
      Figure 2. Log On Screen
      You are required to authenticate by entering the following credentials:
      • User name
      • Password
      • Domain
      You are logged on to the Citrix receiver.
      Figure 3. Authentication Screen
      If the logon authentication fails, you are prompted with a screen. Click try again to query the server again.
      • NOTE: You can break kiosk mode and enter into admin mode at any point of time by using the short cut key. The short cut key is <Control><Alt><Shift>F11.
    2. After the successful login, you can add the required applications or desktops from the left + button.
    3. Click the application or desktop to start it. You are prompted with an error if there as an error message.
    4. You can logout at any point of time by clicking the power icon on task bar. Depending on whether any application is opened, you are prompted with an error message.
      Figure 4. Log Off Screen
    5. If any applications are running, connection center window is displayed, select each application and either log off or disconnect. Following which click the cross to close the control center and logoff completely.
      • NOTE: If you do not follow above procedure to log off, you may see sessions active and running behind the displayed log on button.
      Figure 5. Citrix Connection Center

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1～5個の星の数で評価してください。
  1～5個の星の数で評価してください。
  1～5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\