메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

PDF

Deploying Operating System Using Remote File Share

Before you deploy the operating system using Remote File Share (RFS), make sure that:
  • Configure User and Access Virtual Media privileges for iDRAC7 are enabled for the user.
  • Network share contains drivers and operating system bootable image file, in an industry standard format such as .img or .iso.
    • NOTE: While creating the image file, follow standard network-based installation procedures, and mark the deployment image as read-only to make sure that each target system boots and executes the same deployment procedure.

To deploy an operating system using RFS:

  1. Using Remote File Share (RFS), mount the ISO or IMG image file to the managed system through NFS or CIFS.
  2. Go to Overview > Setup > First Boot Device .
  3. Set the boot order in the First Boot Device drop-down list to Remote File Share.
  4. Select the Boot Once option to enable the managed system to reboot using the image file for the next instance only.
  5. Click Apply.
  6. Reboot the managed system and follow the on-screen instructions to complete the deployment.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.