Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

Configuring and managing the browser connections

The Browser Connections page enables you to create and manage Firefox Browser connections for your thin client.
Figure 1. Manage Browser Connections
To create a new browser connection:
  1. Click the + icon to add a new browser connection. The Browser connection page is displayed.
    Figure 2. Browser Connection Settings
  2. In the Login tab, enter the URL address of the browser connection you want to connect to.
  3. Enter the name of the Browser connection for which you have specified the URL address.
  4. Click the ON/OFF button to enable or disable the auto-connect option after you log in to the session.
  5. Click the ON/OFF button to enable or disable the auto-reconnect option after you disconnect from the session. If the Auto-reconnect option is enabled, you can enter the Delay duration (in seconds) to reconnect to the session. The default value is 30 seconds.
  6. Click the Experience tab to set the window resolution and Kiosk mode.
    Figure 3. Browser Connection Settings
    1. From the drop-down list, select the window resolution you want to set for your Browser window.
    2. Click the Kiosk button to enable the Kiosk mode for your browser.
      • NOTE: When the Kiosk is Enabled, you cannot change window resolution.
  7. Click Save to save the changes. The browser connection created by you is displayed in the Browser Connections list.
To manage a Browser connection:
  1. Hover the mouse over a particular browser connection name. The Edit, Remove, and Connect options are displayed next to the browser connection name.
  2. Click Edit to edit the URL address and other settings of the browser connection.
  3. Click Remove to remove the browser connection from the list.
  4. Click Connect to connect to the URL address you have specified for your browser connection. The webpage opens on your default browser.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \