Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Configuring multiple iDRACs using RACADM

You can configure one or more iDRACs with identical properties using RACADM. When you query a specific iDRAC using its group ID and object ID, RACADM creates the .cfg configuration file from the retrieved information. File name is user specified. Import the file to other iDRACs to identically configure them.
  • NOTE:
    • The configuration file contains information that is applicable for the particular server. The information is organized under various object groups.
    • Few configuration files contain unique iDRAC information (such as the static IP address) that you must modify before you export the file to other iDRACs.

You can also use the system configuration XML file to configure multiple iDRACs using RACADM. System configuration XML file contains the component configuration information, and this file is used to apply the configuration for BIOS, iDRAC, RAID, and NIC by importing the file into a target system. For more information, see XML Configuration Workflow white paper available at dell.com/support/manuals or at Dell Tech Center.

To configure multiple iDRACs using the .cfg file:

  1. Query the target iDRAC that contains the required configuration using the command: racadm getconfig -f myfile.cfg.

    The command requests the iDRAC configuration and generates the myfile.cfg file. If required, you can configure the file with another name.

    • NOTE: Redirecting the iDRAC configuration to a file using getconfig -f is only supported with the local and remote RACADM interfaces.
    • NOTE: The generated .cfg file does not contain user passwords.

    The getconfig command displays all configuration properties in a group (specified by group name and index) and all configuration properties for a user by user name.

  2. Modify the configuration file using a simple text editor (optional).
    • NOTE: It is recommended that you edit this file with a simple text editor. The RACADM utility uses an ASCII text parser. Any formatting confuses the parser, which may corrupt the RACADM database.
  3. Use the new configuration file to modify the target iDRAC using the command: racadm config -f myfile.cfg This loads the information into the other iDRAC. You can use config subcommand to synchronize the user and password database with Server Administrator.
  4. Reset the target iDRAC using the command: racadm racreset

Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\