Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Storage devices — apply operation scenarios

Case 1: selected an apply operation (apply now, at next reboot, or at scheduled time) and there are no existing pending operations

If you have selected Apply Now, At Next Reboot, or At Scheduled Time and then clicked Apply, first the pending operation is created for the selected storage configuration operation.
  • If the pending operation is successful and there are no prior existing pending operations, then the job is created. If the job is created successfully, a message indicating that the job ID is created for the selected device is displayed. Click Job Queue to view the progress of the job in the Job Queue page. If the job is not created, a message indicating that the job creation was not successful is displayed. Also, the message ID and the recommended response action are displayed.
  • If the pending operation creation is unsuccessful and there are no prior existing pending operations, an error message with ID and recommended response action is displayed.

Case 2: selected an apply operation (apply now, at next reboot, or at scheduled time) and there are existing pending operations

If you have selected Apply Now, At Next Reboot, or At Scheduled Time and then clicked Apply, first the pending operation is created for the selected storage configuration operation.
  • If the pending operation is created successfully and if there are existing pending operations, then a message is displayed.
    • Click the View Pending Operations link to view the pending operations for the device.
    • Click Create Job to create job for the selected device. If the job is created successfully, a message indicating that the job ID is created for the selected device is displayed. Click Job Queue to view the progress of the job in the Job Queue page. If the job is not created, a message indicating that the job creation was not successful is displayed. Also, the message ID and the recommended response action is displayed.
    • Click Cancel to not create the job and remain on the page to perform more storage configuration operations.
  • If the pending operation is not created successfully and if there are existing pending operations, then an error message is displayed.
    • Click Pending Operations to view the pending operations for the device.
    • Click Create Job For Successful Operations to create the job for the existing pending operations. If the job is created successfully, a message indicating that the job ID is created for the selected device is displayed. Click Job Queue to view the progress of the job in the Job Queue page. If the job is not created, a message indicating that the job creation was not successful is displayed. Also, the message ID and the recommended response action are displayed.
    • Click Cancel to not create the job and remain on the page to perform more storage configuration operations. 

Case 3: selected add to pending operations and there are no existing pending operations

If you have selected Add to Pending Operations and then clicked Apply, first the pending operation is created for the selected storage configuration operation.
  • If the pending operation is created successfully and if there are no existing pending operations, then an information message is displayed:
    • Click OK to remain on the page to perform more storage configuration operations.
    • Click Pending Operations to view the pending operations for the device. Until the job is created on the selected controller, these pending operations are not applied.
  • If the pending operation is not created successfully and if there are no existing pending operations, then an error message is displayed.

Case 4: selected add to pending operations and there are prior existing pending operations

If you have selected Add to Pending Operations and then clicked Apply, first the pending operation is created for the selected storage configuration operation.
  • If the pending operation is created successfully and if there are existing pending operations, then an information message is displayed:
    • Click OK to remain on the page to perform more storage configuration operations.
    • Click Pending Operations to view the pending operations for the device.
  • If the pending operation is not created successfully and if there are existing pending operations, then an error message is displayed.
    • Click OK to remain on the page to perform more storage configuration operations.
    • Click Pending Operations to view the pending operations for the device.
  • NOTE:
    • At any time, if you do not see the option to create a job on the storage configuration pages, go to Storage Overview > Pending Operations page to view the existing pending operations and to create the job on the required controller.
    • Only cases 1 and 2 are applicable for PCIe SSD. You cannot view the pending operations for PCIe SSDs and hence Add to Pending Operations option is not available. Use racadm command to clear the pending operations for PCIe SSDs.

Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\