Avançar para o conteúdo principal
Terminar sessão

Damos-lhe as boas-vindas à Dell

Minha conta
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Iniciar sessão Criar uma conta Início de sessão Premier Início de sessão no programa de parceiros
Contacte-nos

Dell PowerEdge R730 Owner's Manual

PDF

Installing a GPU card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Follow the safety guidelines listed in Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the cooling shroud.
  4. Remove the heat sinks.

Steps

  1. Unpack the GPU cards and the GPU enablement kit.
  2. Install the heat sinks from the kit and reinstall the cooling shroud.
  3. Close the expansion card locking tab on the cooling shroud and riser.
  4. Lift the expansion card latch.
  5. Remove the filler brackets for the single- or double-wide GPU cards.
  6. Replace the remaining filler brackets with the brackets from the GPU kit.
  7. Align the GPU card connector with the slot on the riser.
  8. Insert the GPU card into the riser slot until it is fully seated.
  9. Locate the GPU power connectors on the cable and plug them to the six-pin and eight-pin connectors on the GPU card.
    NOTE: Ensure that the GPU card is installed correctly into the GPU card lock.
  10. Press down on the GPU card lock to secure the card in position.
  11. Ensure that the GPU card is seated into the PCIe card holder latch.
  12. Press the touch point to open the PCIe card holder latch and/or the expansion card locking tabs.
  13. Connect the GPU power cable to the riser.
  14. Close the expansion card latch/latches.
    Figure 1. Installing the GPU card
    This figure shows installing the GPU card.
    1. expansion card locking tab (3)
    2. GPU card
    3. PCIe card holder latch
    4. expansion card latch
    5. expansion card riser 3

Next steps

Follow the procedure listed in the After working inside your system section.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\