Avançar para o conteúdo principal
Terminar sessão

Damos-lhe as boas-vindas à Dell

Minha conta
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Iniciar sessão Criar uma conta Início de sessão Premier Início de sessão no programa de parceiros
Contacte-nos

Dell PowerEdge R730 Owner's Manual

PDF

Installing expansion card risers

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. If removed, install the expansion card(s) into the expansion card riser 1.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. Align the expansion card riser with the connectors and the riser guides on the system board.
  2. Lower the expansion card riser into place until the expansion card riser is fully seated in the connector.
    Figure 1. Installing the expansion card riser 1
    This figure shows installing the expansion card riser 1
    1. expansion card riser 1 cage
    2. expansion card riser 1
    3. riser guide-back (right)
    4. riser guide-back (left)
    5. expansion card riser 1 connector
    6. riser guide-front
    Figure 2. Installing the expansion card riser 2
    This figure shows installing the expansion card riser 2
    1. power connector (for GPU cards)
    2. expansion card riser 2
    3. riser guide-back
    4. expansion card riser 2 connector
    5. riser guide-front
    Figure 3. Installing the expansion card riser 3
    This figure shows installing the expansion card riser 3
    1. riser guide-front
    2. power connector (for GPU cards)
    3. expansion card riser 3
    4. riser guide-back
    5. expansion card riser 3 connector

Next steps

  1. Install the expansion card(s) into the expansion card risers 2 or 3.
  2. Follow the procedure listed in the After working inside your system section.
  3. Install any device drivers required for the card as described in the documentation for the card.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\