Dell PowerEdge R730 Owner's Manual

Installing the cooling shroud

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Follow the safety guidelines listed in the Safety instructions section.
Follow the procedure listed in the Before working inside your system section.
If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing bracket.

Steps

Align the tabs on the cooling shroud with the securing slots on the chassis.
Lower the cooling shroud into the chassis until it is firmly seated.
Figure 1. Installing the cooling shroud
1. cooling shroud
2. touch point (2)

Next steps

If removed, install the full-length PCIe card.
Follow the procedure listed in the After working inside your system section.

Damos-lhe as boas-vindas

Damos-lhe as boas-vindas à Dell

Dell PowerEdge R730 Owner's Manual

Installing the cooling shroud

Prerequisites

Steps

Next steps

Classifique este conteúdo