Integrated NIC
|
Allows you to
configure the integrated network controller. The options are:
- Enable UEFI Network Stack
- Disabled
- Enabled
-
Enabled w/PXE (Default Setting)
|
Parallel Port
|
Allows you to
define and set how the parallel port on the docking station operates.
You can set the parallel port to:
- Disabled
-
AT (Default Setting)
- PS2
- ECP
|
Serial Port
|
Identifies and
defines the serial port settings. You can set the serial port to:
- Disabled
-
COM1 (Default Setting)
- COM2
- COM3
- COM4
-
NOTE: The operating
system may allocate resources even if the setting is disabled.
|
SATA Operation
|
Allows you to
configure the internal SATA hard-drive controller. The options are:
- Disabled
- AHCI
-
RAID On (Default Setting)
-
NOTE: SATA is
configured to support RAID mode.
|
Drives
|
Allows you to
enable or disable various drives on board. The options are:
-
SATA-0
-
SATA-1
-
SATA-3
-
SATA-4
-
M.2 PCIe SSD-0
-
M.2 PCIe SSD-1
Default Setting: The highlighted devices are enabled.
|
SMART Reporting
|
This field controls
if the hard drive errors for the integrated drives are reported during
system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification. This option is disabled
by default.
|
USB/Thunderbolt Configuration
|
Allows you to
define the USB configuration. The options are:
-
Enable USB Boot Support
-
Enable External USB Port
-
Enable Thunderbolt Port
- Enable Thunderbolt Boot Support
-
Always Allow Dell Dock
- Enable Thunderbolt (and PCIe behind TBT) Pre-boot
Default Setting: Highlighted options are enabled.
|
USB PowerShare
|
Allows you to
configure the behavior of the USB PowerShare feature. The option is
disabled by default.
|
Audio
|
This field enables
or disables the integrated audio controller.
-
Enable Audio
-
Enable Microphone
-
Enable Internal Speaker
Default Setting: All the options are enabled.
|
Keyboard Illumination
|
This field lets
you choose the operating mode of the keyboard illumination feature.
- Disabled
- Dim
-
Bright (Default Setting)
|
Keyboard Backlight Timeout on AC
|
This feature defines
the timeout value for the keyboard backlight when AC adapter is plugged
into the system.
- 5 seconds (Default settings)
- 10 seconds
- 15 seconds
- 30 seconds
- 1 minute
- 5 minute
- 15 minute
- Never
|
Keyboard Backlight Timeout on Battery
|
This feature defines
the timeout value for the keyboard backlight when system is running
only on battery power.
- 5 seconds
- 10 seconds (Default settings)
- 15 seconds
- 30 seconds
- 1 minute
- 5 minute
- 15 minute
- Never
|
Touchscreen
|
This field controls
whether the touchscreen is enabled or disabled. The option is enabled
by default.
|
Unobtrusive Mode
|
When enabled,
pressing Fn+F7 will turn Off all light and sound emissions in the
system. Press Fn+F7 to resume normal operation. The option is disabled
by default.
|
Miscellaneous Devices
|
Allows you enable
or disable the various on board devices. The options are:
-
Enable Camera
- SD Card Read Only
-
Enable Media Card
- Disable Media Card
Default Setting: The highlighted devices are
enabled.
|