Option
|
Description
|
System Profile
|
Sets the system profile. If you set the
System Profile option to a mode other than
Custom, the BIOS automatically sets the rest of the options.
You can only change the rest of the options if the mode is set to
Custom. This option is set to
Performance Per Watt Optimized (DAPC) by default.
DAPC is Dell Active Power Controller.
Performance Per Watt (OS).
-
NOTE: All the parameters
on the system profile setting screen available only when the
System Profile option is set to
Custom.
|
CPU Power Management
|
Sets the CPU power management. This option is set
to
System DBPM (DAPC)
OS
DBPM
by default. DBPM is Demand-Based Power Management.
|
Memory Frequency
|
Sets the speed of the system memory. You can select
Maximum Performance,
Maximum Reliability, or a specific speed.
|
Turbo Boost
|
Enables or disables the processor to operate in turbo
boost mode. This option is set to
Enabled by
default.
|
C States
|
Enables or disables the processor to operate in all
available power states. This option is set to
Enabled by default.
|
Monitor/Mwait
|
Enables the Monitor/Mwait instructions in the processor.
This option is set to
Enabled for all system
profiles, except
Custom by default.
-
NOTE: This option can be
disabled only if the
C States option in the
Custom mode is set to
disabled.
-
NOTE: When
C States is set to
Enabled in
the
Custom mode, changing the Monitor/Mwait
setting does not impact the system power or performance.
|
Memory Patrol Scrub
|
Sets the memory patrol scrub frequency. This option
is set to
Standard by default.
|
Memory Refresh Rate
|
Sets the memory refresh rate to either 1x or 2x. This
option is set to
1x by default.
|
Memory Operating Voltage
|
Sets the DIMM voltage selection. When set to Auto,
the system automatically sets the system voltage to the optimal setting
based on the DIMM capacity and the number of DIMMs installed. By default,
the Memory Operating Voltage option is set to Auto.
|
Collaborative CPU Performance Control
|
Enables or disables the CPU power management. When
set to
Enabled, the CPU power management is controlled by the
OS DBPM and the System DBPM (DAPC). This option is set to
Disabled by default.
|