跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Alienware m15 R2 Service Manual

PDF

Removing the base cover

Prerequisites

  1. Follow the procedure in Before working inside your computer.

About this task

The following image indicates the location of the base cover and provides a visual representation of the removal procedure.

Image: Removing the base cover

Image: Removing the base cover

Image: Disconnecting the battery from the system board

Steps

  1. Remove the two screws (M2.5x5) that secure the base cover to the palm-rest assembly.
  2. Loosen the six captive screws.
  3. Using a plastic scribe, pry the base cover from the bottom-left corner and continue to work on the sides to open the base cover.
  4. Lift the base cover off the palm-rest assembly.
  5. Disconnect the battery from the system board.
  6. Press and hold the power button for 5 seconds to ground the computer and drain the flea power.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\