跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Alienware m15 R2 Service Manual

PDF

Installing the coin-cell battery

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.

Installing the coin-cell battery

Steps

  1. Connect the coin-cell battery to the coin-cell battery cable.
  2. Adhere the coin-cell battery into its slot on the palm-rest assembly.
  3. Adhere the tapes securing the coin-cell battery cable to the right I/O-board and palm-rest assembly.
  4. Connect the coin-cell battery cable to the connector on the system board.

Next steps

  1. Install the battery.
  2. Install the 2230 solid-state drive. (if applicable)
  3. Install the 2280 solid-state drive. (if applicable)
  4. Install the base cover.
  5. Follow the procedure in After working inside your computer.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\