Connectrix MP 7810B

This document highlights minimum, recommended, and latest code versions for Dell Technologies Networking products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

This article explains an issue where MDS 9396S switches may unexpectedly reload or MDS 9700 modules log EOBC failures due to a hardware-related PCIe operation failure.

Configuration save attempts keep timing out at 99% with the "copy running-config startup-config" command.

The firmware of Loader in output of show version displays N/A.

One or more interfaces on an affected linecard are in "Link failure" or "not-connected" state. This issue has so far been observed on 32 Gb linecard DS-X9648-1536K9. EOBC timeouts from the linecard to both supervisors with CPUHOG message logged in linecard onboard logs. Timeout drops on various switch ports and associated traffic impact may occur.

The syslog facility allows the device to send a copy of the message log to a host for more permanent storage. This feature allows you to examine the logs over a long period of time or if the device is not accessible.

An NX-OS password with a "?" Character cannot be entered at the CLI or using a script such as the NX-OS CLI on all MDS Platforms.

The purpose of Smart Zoning is to reduce the amount of administrative overhead that is required to add new hosts to the SAN with the addition of a few keywords.

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

Addition of VLANs to Unified Computing System (UCS) Manager when using updating service profile templates and vNIC templates.

How do I configure an SNMP community string on MDS and Nexus Switches for read, write access?

Connectrix Cisco Multilayer Director Switch (MDS): How to configure switch priority for principal switch selection.

This issue is seen when the NX-OS firmware version and the DCNM version in use are not compatible.

CallHome process causing unavailability in show CallHome, show running-config, or copy run start.

This issue occurs when we try to activate a port-channel through Cisco MDS9000 and Nexus9000 Switch and the port-channel fails to come online due to OUI issue.

WebTools does not launch after upgrading switch to FOS 9.x.

Cisco MDS: Interface "no shutdown" command does not show in the running-config after ISSU 8.4(1) and 8.4(1a)

Dell Connectrix B-Series remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

An MDS Supervisor-4 module resets without warning.

This article gives step-by-step instructions on how to collect switch support logs using PuTTY.

Dell Connectrix B-Series remediation is available for OpenSSH Vulnerability that could be exploited by malicious users to compromise the affected system.

This article outlines the procedure required to gather tech-support data from a Cisco MDS Fibre Channel switch.

Dell Connectrix (Cisco) MDS DCNM remediation is available for an NX-OS vulnerability that may be exploited by malicious users to compromise the affected system.

Dell Connectrix (Cisco) remediation is available for multiple Spring vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell Connectrix (Brocade) remediation is available for multiple Fabric OS (FOS) security vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell Connectrix Cisco MDS 9000 Switches remediation is available for NX-OS Software that may be exploited by malicious users to compromise the affected system.

This article provides switch configuration guidance for Dell PS Series and SC Series SANs. Switch vendors include Arista, Brocade, Cisco, Dell, Huawei, HP, Juniper, and others.

As a part of the deployment guidance for Dell EMC Storage Spaces Direct Ready Nodes, for infrastructures that use RoCE v2 for RDMA using Mellanox CX4 LX adapters, we recommend disabling DCBX willing globally in the host OS and setting network adapter DCBXMode to Host in charge.

Troubleshooting the Switch Fabric Module