Connectrix

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Users are unable to log in due to full file systems on SANnav versions 2.2.1, 2.2.2, 2.2.2.1, and 2.2.2a.

Nexus Dashboard Fabric Controller (NDFC) does not show data for aggregate link/port-channel with MDS switch firmware lower than NX-OS 9.4.3.

While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands.

Enterprise Director switches unable to HAsync after SNMP daemon termination.

Connectrix B-Series and MDS-Series: How to check the link connectivity between a host and storage on SAN switches.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

DIAG-6004 messages in the RAS log may not be indicative of an issue.

HOW TO configure the MAPS.

How to get a rough indication of the severity of the delay of frames transmitted on an FC port and ISL trunk.

Connectrix B-Series: SNMP management tool cannot communicate with the Brocade switch.

DCX and DCX-4S directors and FC8-32E and FC8-48E Condor3 based 8G port blades.

The root cause of the issue is an incompatibility between Cisco port-channel and HP link aggregation, these are not inter-operable.

Cause for duplicate ACKs seen in the FCIP statistics.

Unable to connect to the switch by Device manager.

Procedure to recover a lost administrator password from the console port of a Cisco MDS 9000 Series Switch.

Flow monitors are configured to count the Initiator or Target (IT) flows to a device. Because of zoning and device activity, the number of flows has surpassed the threshold for the PIDs for which the alerts were triggered.

What is a keepalive timeout in FCIP?

This article explains how to assign an Initial Company Administrator.

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

With Connectrix MDS-Series ISL is not passing VSAN traffic because of zone mode mismatch in the Cisco switch.

When a device alias mode is changed from basic mode to enhanced mode, the corresponding applications are informed about the change. The applications then start accepting the device alias-based configuration in the native format.

Ports on MOD_Val

Int fc1/17~32 are on the M9XT-FC1632 Port Expansion Module (PEM), by design their port licenses could not be released.

Connectrix ED-DCX8510-8B: How to upgrade a replacement CP that is arrived with lower firmware version of other CP in the DCX 8510 directors.

This article explains how to promote Company Administrators.

Connectrix: Why does the port not come online after replacing faulty hardware that caused the port to enter a Port_Flt state?

Connectrix: Brocade B-Series SANnav Operator role user unable to log in with LDAP authentication.

The Monitoring and Alerting Policy Suite (MAPS) is an optional storage area network (SAN) health monitor supported on Brocade switches running Fabric OS 7.2.0 or later.