VPLEX VS6

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article talks to an issue where the "ndu pre-check" shows error in I/O aborts.

This article talks to an issue where the back-end array is reporting that it has a greater or less number of logical units than what VPLEX requested. The number does not match what the array actually transferred in the response data buffer, and does not match what the array actually has in its masking-view/storage-group for VPLEX.

Deployment KB: VPLEX Metro: How to Increase the Speed of the Rebuild for VPLEX Metro Distributed Devices

Running the ndu pre-check script gives the following error: Verify management network redundancy.. ERROR

After configuring SNMP traps on VPLEX, it is not possible to ping the SNMP server from the VPLEX management server.

This article talks on how to set up a customer monitor to track specific data.

This article directs you to the SolVe document on 'Troubleshooting site replacement issues'.

VPLEX UI displays the anatomy of a distributed device as containing an extent provisioned from the remote site.

This article talks about how to solve an error message seen while listing RecoverPoint context listing in VPLEX.

This article addresses the XCOPY failure when using source and target VPLEX local volumes across clusters.

VPLEX: Cluster shutdown procedure with MetroPoint configuration may have I/O disruption

After an upgrade to GeoSynchrony 6.0 Service Pack 1 Patch 2 (6.0.1.02.00.03), distributed virtual volumes have a service status of "disconnected." This does not affect I/O, and there should be no data unavailability (DU) due to this issue.

This article talks about the difference seen for the CPU idle percentage value reported from the SNMP and the UI or CLI as the SNMP is reporting an incorrect value.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

This article describes an issue where different rule-set Names are displayed between Cluster-1 and Cluster-2 on VPLEX Metro Configuration.

Dell VPlex remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Isilon/PowerScale node panics

This article describes how to identify which storage or LUN is presented at a particular naa-id.

A VPLEX distributed device is experiencing performance issues due to high write latency.

This article describes an issue where the automated meta-volume backup process may fail if the underlying storage-volume component used to create the meta-volume has been renamed. This article provides the workaround steps to resolve the issue.

This article talks to the issue where in the legacy Flash Graphical UI, GeoSynchrony pre-6.2, where listing the Storage-Volumes fails to retrieve the volumes for the cluster if the cluster names were renamed from the default names, Cluster-1 and Cluster-2 (if a metro), to a user preferred name. This was also seen to be an issue with the HTML5 Graphical UI in the 6.2.x version as well.

IP WAN on 6.0.X may experience performance issues when MTU is set to 9000 and the transfer size is above 1M. These issues can be resolved by setting the VPLEX IP WAN ports MTU to 1500 and lowering the transfer size to below 1M. Commands for these changes can be found in the resolution section of this article.

This article describes the procedure for users to get notifications of documents published on any product that has notification abilities.

This article talks about when a Distributed Device, at the Virtual Volume level, shows a service status of inactive. Workaround provided.

This article describes how to find the serial number, product ID, or Product Serial Number Tag (PSNT) that is required to open a service request or support case for Dell Storage and Data Protection hardware products.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

This article provides links to VPLEX Best Practices documents.