QLogic Family of Adapters

The article describes how to troubleshoot network connectivity issues for network cards.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

Linux-based Dell Update Packages (DUPs) for Intel Network cards on firmware family 24.0.0 may display the message "Requires Power Cycle for activating the updated firmware".

Steps necessary to configure the QLogic FastLinQ 41262 network adapter as defined in the "Microsoft HCI Solutions from Dell Technologies" Deployment Guide to enable RDMA, iWARP, and disable DCB.

This article provides an example of how to configure a fully converged network for a Dell Technologies Solutions Microsoft Azure Stack HCI cluster host. Information in this article is taken from "Deployment instructions for fully converged network configuration," available at https://infohub.delltechnologies.com/en-us/l/e2e-deployment-and-operations-guide-with-scalable-networking-windows-1/fully-converged-network-configuration-38/2/.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Microsoft Hyper-V Virtual Machine (VM) Live Migration may fail or no LUNs are mapped after powering on VMs due to Windows architecture and hardware configuration limiting the number of vFC LUNs.

After upgrading FW 16.35.30.06 for Dell OEM Mellanox CX5 adapters, "Interface Type" in iDrac GUI shows "Not Supported" instead of actual medium like "Optical Fiber".

iDRAC version 6.10.00.00 and later, when 3 out of 4 partitions are enabled on a Dell Marvell QL41262 adapter, the iDRAC user interface displays the link speed as "Unknown."

Network port enumeration on Windows Server 2022 with Dell network adapters may swap port designations.

This article informs about QLogic QLE2560 FC8 Single Channel Host Bus Adapters (HBAs) that use specific drivers with ESXi 7.0 U3 Build version 19193900 or newer and the issues that have been found.

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.

Broadcom 5741x/57454/5750x Firmware update issue - SUP0550: Unable to update the firmware of the component Broadcom 5741x/57454/5750x to version 22.00.07.60 because the update operation was abruptly stopped. The reason for abrupt stoppage: Processing error.

In Hyper-V, the Network Virtualization using Generic Routing Encapsulation (NVGRE) may fail with Encapsulation Task Offload enabled.