OEMR T550

Denne artikkelen inneholder veiledning for Dell System Update (DSU).

Denne artikkelen forklarer hvordan du oppretter og importerer et iDRAC-sertifikat.

Denne artikkelen inneholder fremgangsmåten for å feilsøke en melding om kabinettinntrenging og åpent kabinett for PowerEdge-servere.

This article provides guidance for Dell PowerEdge servers requiring remediation for the Microsoft Secure Boot certificate expiration (June 2026). It applies to UEFI-based systems with Secure Boot enabled and older Secure Boot certificates affected by the Microsoft Secure Boot certificate expiration (June 2026). The operating system primarily manages Secure Boot certificate updates, and customers should ensure they update their systems using supported Microsoft update mechanisms. It applies to Windows Server operating systems affected by this change, as defined by Microsoft, running on physical systems with customer-managed firmware and Secure Boot configuration. It does not apply to cloud platforms or appliances where the provider manages firmware and Secure Boot keys, such as Microsoft Azure, AX, or APEX-Managed Cloud. Systems already running BIOS versions that include the updated Secure Boot certificates may not require this procedure.

Denne artikkelen forklarer hva diskfeil PDR1001 og PDR3 betyr på Dell PowerEdge-servere, og anbefalte fremgangsmåter for å løse disse problemene. Ved å forstå disse varslene og handle raskt, kan du opprettholde lagringstilstanden, forhindre nedetid og beskytte kritiske data.

This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This document answers questions about SupportAssist Enterprise.

Artikkelen nedenfor beskriver en løsningsmekanisme for å gjenopprette PowerEdge-systemer fra kritisk loggoppføring "SWC5008 Unable to access Front LED Panel due of a hardware error condition" for noen få versjoner av iDRAC.

PowerEdge-servere støtter ikke installering av operativsystem eller oppstart fra direkte CPU-tilkoblede NVMe SSD-disker hvis størrelsen på metadataformatet ikke er satt til 0.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Dell PowerEdge Toshiba MG08- og MG09-harddiskstasjoner kan støte på avbruddsfri bakgrunnsmedieskanning (BMS), noe som forårsaker I/O-feil eller tidsavbrudd.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

Denne artikkelen inneholder informasjon om hvordan du kontrollerer om et nettverksgrensesnittkort (NIC) er kompatibelt med en PowerEdge-server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

Dell Samsung PM893 SSD-er med fastvare HJ55 eller tidligere opplever for tidlige SMART-feil

R7725, R6725, R7715 og R6715 Antall CPU-kjerner gjenkjennes ikke på riktig måte.

Dell Technologies fraråder nedgradering av harddisk- eller SSD-fastvare, bortsett fra i validerte scenarier, på grunn av uforutsigbare resultater og problemer med versjonsrapportering.

The "Predictive failure reported for disk x" error continues to be logged every 24 hours, even after the identified drive has been replaced. The issue only affects drives connected to PERC Controllers in RAID configuration.

PowerEdge-servere krasjer med uopprettelige PCIe-feil under oppdatering av fastvaren til Kioxia CM6 NVMe-stasjonen.

CPU-er kan oppfattes som varme mens serveren er inaktiv.

The Dell SS540 SAS solid state drive is reported as not correctly functioning.

PowerEdge servers with Emulex Fiber Channel (FC) driver version 12.01.12 may fail driver installation under Windows Defender Application Control (WDAC) Enforced Mode on Windows Server.

PowerEdge: Broadcom NXE devices with Driver 229.2.73 (SWB: Y7T4X) may report that the interfaces are missing in the operating system when secure boot is enabled.

Attempts to update the Broadcom NetXtreme 5719 and 5720 Network Interface Card (NIC) using the .bin file with sudo in Linux results in an 'Inventory Collection Failure' error.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

Multiple SKHynix NVMe (PS1010) drives in the same server experienced PCIe link training failures during the deployment phase, resulting in the drives entering read-only mode.

Viewing the VLAN details of a deployment template's network settings list devices that are not associated to the template.

This article describes how to view and clear the system event log (SEL) in System Setup.