Removal
Stand
Identify the stand highlighted in blue.
Press and hold down on the tab that secures the stand to the display assembly base.
Slide and lift the stand off the display assembly base.
Back Cover
Identify the back cover highlighted in blue.
Press down on the tab and slide the back cover to release.
Lift the back cover off the display assembly base.
System Board Shield
Identify the system board shield highlighted in blue.
Remove the screws that secure the system board shield to the display assembly base.
Lift the system board shield off the display assembly base.
I/O cover
Identify the I/O cover highlighted in blue.
Remove the screws that secure the I/O cover to the display assembly base.
Lift the I/O cover off the display assembly base.
Power Supply Unit
Identify the power supply unit highlighted in blue.
Press and hold the securing clip and disconnect the processor power cable from the system board.
Disconnect the control signal cable from the system board.
Disconnect the power cable from the system board.
Remove the screws that secure the power supply unit to the display assembly base.
Remove the screws that secure the power supply connector cable bracket to the display assembly.
Lift the power supply unit along with the cables and the power supply unit connector off the display assembly base.
Install
Power Supply Unit
Identify the power supply unit highlighted in blue.
Place the power supply unit and the power supply unit connector on the display assembly base.
Install the screws that secure the power supply unit to the display assembly base.
Install the screws that secure the power supply connector bracket to the display assembly base.
Connect the processor power cable to the system board.
Connect the control signal cable to the system board.
Connect the power cable to the system board.
I/O cover
Identify the I/O cover location highlighted in blue.
Align the I/O slots with the I/O ports, then place the I/O cover on the display assembly base and align with screw holes.
Install the screws that secure the I/O cover to the display assembly base.
System Board Shield
Identify the system board shield location highlighted in blue.
Place the system board shield on the display assembly base and align with screw holes.
Install the screws that secure the system board shield to the display assembly base.
Back Cover
Identify the back cover location highlighted in blue.
Align the back cover to the display assembly base.
Place and slide the back cover into place on the display assembly base.
Stand
Identify the stand location highlighted in blue.
At an angle, align the tabs on the stand with the slots on the display assembly base.
Slide the stand into place into the slot on the display assembly base.