Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover to the palm rest assembly.
Remove the screws that secure the base cover from the palm rest assembly.
Using a plastic scribe, pry open the base cover along the gap formed near the display hinges.
Lift the base cover off the palm rest assembly.
Battery Cable
Identify the battery cable highlighted in blue.
Disconnect the battery cable from the system board.
Press and hold the power button for 10 seconds to ground the system and remove residual static electricity.
Battery
Identify the battery highlighted in blue.
Loosen the captive screws that secure the battery to the palm rest assembly.
Remove the battery along with the battery cable from the palm rest assembly.
Install
Battery
Identify the battery location highlighted in blue.
Install the battery along with its battery cable into the slot on the palm rest assembly.
Tighten the captive screws that secure the battery to the palm rest assembly.
Battery Cable
Identify the battery cable location highlighted in blue.
Connect the battery cable on the system board.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover with the screw holes and press the edges of the cover until it clicks into place.
Tighten the screws that secure the base cover to the palm rest assembly.
Install the screws that secure the base cover to the palm rest assembly.