How to replace the Optional internal USB card on a PowerEdge R660

This 3D experience gives you the step by step process of replacing the Optional internal USB card and a PowerEdge R660. The procedure will also include removing the System Cover and reinstalling them.

Removal

System Cover

Identify the system cover highlighted in blue.

Using a 1/4 inch flat head or a phillips #2 screwdriver rotate the lock counterclockwise to the unlock position.

Lift the release latch until the system cover slides back.

Lift the cover from the system.

Optional internal USB card

Identify the optional internal USB card highlighted in blue.

Holding the blue tag, lift the internal USB card to disconnect from the connector on the system board.

Remove the USB memory key from the internal USB card.

Install

Optional internal USB card

Identify the optional internal USB card location highlighted in blue.

Connect the USB key to the internal USB card.

Align the internal USB card with the connector on the system board and press firmly until the internal USB card is seated.

System Cover

Identify the system cover location highlighted in blue.

Align the tabs on the system cover with the guide slots on the system and slide the system cover.

Close the system cover release latch.

Using a 1/4 inch flat head or phillips #2 screwdriver, rotate the lock clockwise to the lock position.