Removal
Left Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it from the chassis.
Drive Bay Assembly
Identify the drive bay assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Lift the drive bay assembly at an angle to release the tabs from the chassis.
Slide and remove the drive bay assembly from the chassis.
Memory Module
Identify the memory module highlighted in blue.
Pull the securing clips from both sides of the memory module until the memory module pops up.
Remove the memory module from the slot.
Install
Memory Module
Identify the memory module location highlighted in blue.
Insert the memory module into the slot and press it down until it clicks into place.
Drive Bay Assembly
Identify the drive bay assembly location highlighted in blue.
Slide and secure one side of the drive bay assembly to the chassis.
Press down the other end of the drive bay assembly, securing the tabs into the slots on the chassis.
Connect the data and power cables to the hard drive.
Front Cover
Identify the front cover location highlighted in blue.
Align and insert the front cover tabs into the slots on the right side of the chassis.
Rotate the front cover toward the chassis and press it into place.
Left Side Cover
Identify the side cover location highlighted in blue.
Align and slide the left side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.