Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch until the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Control panel Left
Identify the control panel highlighted in blue
Disconnect the control panel cable from the system board connector.
Remove the screws which secure the left control panels cable cover to the system.
Remove the cable cover away the system.
Remove the screws which secure the left control panel assembly to the system
Hold the left control panel cable, and slide the left control panel out of the system.
Install
Control panel Left
Identify the control panel location highlighted in blue
Align the left control panel assembly with the slot and slide into place
Connect the left control panel cable to the connector on the system board .
Route the control panel cable through the side wall of the system.
Install the screws that secure the control panel assembly to the system
Align and slide the left control panel cable cover in the slot on the system.
Install the screws to secure the control panel cable cover to the system.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system and slide the system cover.
Close the system cover release latch.
Using a flat head or Phillips screwdriver, rotate the lock clockwise to the lock position.