Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Active System Manager Release 8.2 User’s Guide

PDF

Deploy Multiple Instances of Service

  • NOTE: You cannot deploy a service using a template that is in draft state. Publish the template before you use the template to deploy a service.
To deploy multiple instances of service, you must perform the following tasks:
  1. On the Template page, select a template.
  2. Click Deploy Service. Deploy Service window is displayed.
  3. On the Deploy Service window, under Service Information:
    • Select template from the Select Published Template drop-down menu.
    • Enter service name in Service Name field.
    • NOTE: For the multiple instances of deployment, this service name is the base name for the service which needs to be deployed. The first service is called by the name which is provided in Service Name field. Rest of the services are indicated by number after base service name.
  4. Type the number of deployments in Number of Deployments field.
  5. Click Next. It directs you to Deployment Settings in the Deploy Service window.
    • NOTE: When deploying multiple instances of a service, Autogeneration of hostname is required to be configured in a template. When this option is enabled, the user will not be prompted to enter a hostname upon deployment.
  6. Click Next. It directs you to Schedule Deployment option under Deploy Service window. Under Schedule Deployment, two options are there:
    • Deploy Now: To deploy the service immediately, select the option Deploy Now.
    • Schedule later: To deploy the service later, select the option Schedule later.
  7. Select desired date and time from the Date and Time drop-down menu.
  8. Click Finish.
  9. If you have selected Deploy Now option after clicking Finish, you get a message, stating that; Are you sure you wish to deploy the service? Click Yes to deploy now.
    • NOTE: If you want to deploy multiple service on many servers. It is recommended to break these up into smaller group of templates. It is recommended to put 5–10 servers in a single template.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\