Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Active System Manager Release 8.2 User’s Guide

PDF

VMware vSAN

VMware vSAN storage feature allows to create resource pools of a local storage space from multiple ESXi host.

  • NOTE: Before creating the VMware vSAN template, ensure that you have a static network of type VSAN defined.
For server component settings:
  1. On the home page, click Templates.
  2. On the Templates page, create a vSAN template.
  3. On the Template Builder page, click server component, and then click Edit. The Server Component page is displayed.
  4. Click Continue.
  5. Under OS Settings, select the Configure local storage for VMware vSAN check box. Under Hardware settings, SD with RAID enabled for VMware vSAN is automatically displayed in the Target Boot Device box.
    • NOTE: To fully support vSAN, it is recommended to use ESXi 6.0 update 2 or later. The current version shipping with Active System Manager may not be this version. To determine the version of ESXi 6.0 which ships with your version of Active System Manager, see Compatibility Matrix.

      For more information on the OS Settings and Hardware Settings, see Server settings.

  6. Under Network Settings, clear the Enable Partitioning Ports check box, you can add VLAN for networks — Hypervisor Management, Hypervisor Migration, OS Installation, and Public or Private LAN on the same partition.
  7. Create another interface, clear the Enable Partitioning Ports check box, add the VSAN VLAN and select the redundancy check box. For more information on the Network Settings, see Server settings. For cluster component settings:
Table 1. Cluster component settings

Options

Descriptions

Target Virtual Machine Manager

Select virtual machine manager from the Target Virtual Machine Manager drop-down menu.

Data Center Name

Select data center name from Data Center Name drop-down menu.

New Data Center

Type the new data center name in the New Data Center box.

Cluster Name

Select new cluster name from Cluster Name drop-down menu.

New cluster name

Type new cluster name in the New cluster name in the New cluster name box.

Switch Type

Select the switch type as Distributed.

Cluster HA Enabled

Enables or disables highly available cluster.

You can either select or clear the check box. By default, it is unchecked.

Cluster DRS Enabled

Enables or disables distributed resource scheduler (DRS).

You can either select or clear the check box. By default, it is unchecked.

Enable VMware vSAN

Select the Enable VMware vSAN check box.

vSphere VDS Settings

Under vSphere VDS Settings, create appropriate network type such as Hypervisor Management, Hypervisor Migration, OS Installation, and Public or Private LAN.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\