Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Active System Manager Release 8.2 User’s Guide

PDF

Template – deploy SQL Server 2012

ASM includes a default template that allows you to deploy SQL Server 2012. To configure this template, you must provide a valid Microsoft SQL Server 2012 ISO and then copy the application location to the ASM virtual appliance.

To configure ASM virtual appliance:

  1. Log in to ASM virtual appliance as delladmin. The default delladmin credentials are delladmin/ delladmin.
    • NOTE: To login to ASM 8.2 user interface, you need to use the username as admin with the default password as admin.
  2. You must copy Microsoft SQL Server 2012 ISO to the /var/lib/razor/repo-store/ directory.
  3. Unpack Microsoft SQL Server 2012 ISO into CIFs share on the virtual appliance. To perform this task, run the following commands: cd /var/lib/razor/repo-store mount -o loop <SQL2012>.iso/mntrsync -a /mnt/ /var/lib/razor/repo-store/ SQL2012umount /mntrm SQL2012.iso
  4. On the ASM home page, in the left pane, click Templates, select the Deploy SQL Server 2012 template, and then click Clone.
  5. In the Create Template dialog box, enter a name, category, and description. Click Save.
  6. On the Template Builder page, click a storage component, click Edit in the box that is displayed, and then configure the following settings in the Storage Component dialog box. Repeat this step for each storage components.

    1. Under Storage Settings, configure the following:

      1. From the Authentication drop- down list, select the one of the following authentication types based on your environment: IQN/IP or CHAP.

      2. If you have selected the authentication type as CHAP, enter the Chap username and Chap secret for the storage volume

      3. If you have selected the authentication type as IQN/IP, enter the Initiator IQN or IP address for the storage volume.

      • NOTE: If you do not update these password values, the template will not deploy correctly. There is no value to passwords in the default template even if a masked value appears. CHAP user names and secrets should be the same on both volumes if CHAP authentication is used.

    2. Verify the Storage Volume Name .

    3. Click Save.

  7. On the Template Builder page, click a server component, click Edit in the box that is displayed, and then configure the following settings in the Server Components dialog box. Repeat this step for each server components.

    1. Under OS Settings, enter the Administrator password.

    2. Under Network Settings, configure the Hypervisor Management Network, Hypervisor vMotion Network, and Workload networks.

    3. Click Save.

  8. On the Template Builder page, click the cluster component, and configure the following:

    1. Under Cluster Settings, from the Target Hypervisor drop-down list, select the target vCenter.

    2. Verify if you want to create a new datacenter or cluster inside your vCenter instance.

    3. Click Save.

  9. On the Template Builder page, click the virtual machine, and configure the following:

    1. Enter the Administrator password .

    2. From the OS Image drop-down list, select the Windows Image to deploy Windows on the virtual machine.

    3. Verify the OS Image Version.

    4. Enter the Product Key for corresponding OS Image Version.

    5. Select the Workload networks to access this VM.

    6. Click Save.

  10. On the Template Builder page, click one of the application components, click Edit in the box that is displayed, and then configure the following settings in the Application Component dialog box:

    1. Under Application Settings, in the Media Location box, enter the directory location where the SQL 2012 ISO was unpacked.

    2. Add appropriate account name and password information as required.

    3. Click Save.

  11. Click Publish Template. This template is now ready to be deployed.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\