Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Dell PowerEdge FC430 Owner's Manual

Installing the PCIe mezzanine card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE: You must remove the PCIe mezzanine card to replace a faulty PCIe mezzanine card.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. If connected, disconnect all external storage devices.

  4. If connected, disconnect all USB devices.

  5. Remove the SSD cage.

  6. Remove the PCIe mezzanine card.

  7. Keep the Phillips #2 screwdriver ready.

Steps

  1. To install the PCIe mezzanine card:
    1. Place the SSD cage upside down with the USB ports to your right.
    2. Slide the PCIe mezzanine card on to the SSD cage.
    3. Secure the card in place with the screws.
    4. Install the PCIe mezzanine card bridge.
      CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
  2. To install the SSD cage base cover :
    1. Slide the SSD cage base cover into place.
    2. Secure the SSD cage base cover to the SSD cage.
  3. Align the guide slots on the SSD cage with the guide pins on the chassis.
  4. Press down the SSD cage till the connectors on the SSD cage completely engage with the corresponding connectors on the system board.
    Figure 1. Installing the PCIe mezzanine card
    This image shows installing the PCIe mezzanine card
    1. screw hole on SSD cage (2)
    2. external storage connector (2)
    3. PCIe mezzanine bridge card
    4. Screw (2)
    5. PCIe mezzanine card
    6. SSD cage

Next steps

  1. Install the SSD cage.

  2. If applicable, reconnect the disconnected storage devices.

  3. If applicable, reconnect the disconnected USB devices.

  4. Follow the procedure listed in the After working inside your system section.

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\