Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.1 User’s Guide

PDF

Configuring Active Directory With Standard Schema Using RACADM

To configure CMC Active Directory with Standard Schema using the RACADM:
  1. Open a serial/Telnet/SSH text console to the CMC, and type: 
    racadm config -g cfgActiveDirectory -o cfgADEnable 1
                                    racadm config -g cfgActiveDirectory -o cfgADType 2
                                    racadm config -g cfgActiveDirectory -o
                                    cfgADRootDomain <fully qualified root domain name>
                                    racadm config -g cfgStandardSchema -i <index> -o
                                    cfgSSADRoleGroupName <common name of the role
                                    group>
                                    racadm config -g cfgStandardSchema -i <index>-o
                                    cfgSSADRoleGroupDomain <fully qualified domain
                                    name>
                                    racadm config -g cfgStandardSchema -i <index> -o
                                    cfgSSADRoleGroupPrivilege <Bit mask number for
                                    specific user permissions>
                                    racadm sslcertupload -t 0x2 -f <ADS root CA
                                    certificate>
                                    racadm sslcertdownload -t 0x1 -f <RAC SSL
                                    certificate>
    • NOTE: For bit mask number values, see the database property chapter of the Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide .
  2. Specify a DNS server using one of the following options:
    • If DHCP is enabled on CMC and you want to use the DNS address obtained automatically by the DHCP server, type the following command: 
      racadm config -g cfgLanNetworking -o
                                          cfgDNSServersFromDHCP 1
    • If DHCP is disabled on CMC or you want manually to input your DNS IP address, type the following commands: 
      racadm config -g cfgLanNetworking -o
                                          cfgDNSServersFromDHCP 0
                                          racadm config -g cfgLanNetworking -o
                                          cfgDNSServer1 <primary DNS IP address>
                                          racadm config -g cfgLanNetworking -o
                                          cfgDNSServer2 <secondary DNS IP address>

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\